3
If your Hoover washing machine displays error code e03, this means that your machine is unable to drain the dirty wash water. This also means you cannot open the door to access your laundry. Read on to find out how to resolve this error code.
Here’s what you can do if your Hoover washing machine displays error code e03.
If your Hoover washing machine displays error code e03, fortunately there are several ways to get your machine working again. The solution to the problem lies in checking the drain pipes. If these are blocked, the dirty water cannot drain away.
- Numerous household items can block drain pipes. Hair ties, hair, coins, food and grease often prevent dirty water from draining away.
- Most Hoover machines have a small drain pipe at the front. You can use this to drain the water out of your machine first.
- If your machine does not have this small drain pipe, you will need to remove the water via the grey drain pipe at the back of the machine.
- Next, check the filter on your Hoover machine. This should prevent obstructing items, such as hair ties or similar objects, from entering the drain pipe. Cleaning the filter is essential to resolve the error code.
- Also check that there are no bends or kinks in the pipe that could be obstructing the water flow.
- However, it may also be due to so-called voltage spikes – an electrical fault that triggers the error code. You should therefore unplug your machine for a few minutes and then switch it back on.
- It is also possible that a damaged heating element is causing the error code to appear. If this is the case, you will need to have your Hoover machine repaired.
