128
Resetting an OOONO device is possible without tools. All you have to do is open the battery compartment
Resetting the OOONO: Instructions
If your OOONO CO-Driver device no longer works properly, you must reset it.
- Remove the device from the vehicle and turn it over. Remove the battery cover
- Click lightly on the battery socket from above to loosen it. Then pull out the battery cell. This is also the way to replace the battery if you need to dispose of the old one.
- Now press and hold the button on the front for ten seconds. This will reset the device.
- Reinsert the battery and close the battery compartment with the cover. Then switch the device back on. To do this, press and hold the OOONO button in the middle until the flash starts to flash.
- Note: You may have to set up the connection to the app again. To do this, simply clear the app cache and set it up again.
